7 Junket Spa Remote Instructions

The spa is heated complimentary for your stay. The heating feature on the spa is an 'On Demand' service and you will need to use this remote control to turn on the spa heat and jets when you are ready to use it.

To Heat The Spa:

1. Press the 'SPA' button once.
2. The heater will turn on quickly and start heating the spa and the spa will stop spilling over into the pool.                                                                                                      It may take up to 45 minutes for the spa to reach its maximum temperature of 102°
3.  Once the spa has reached its maximum temperature, press the 'JETS' button to activate the spa jets.
4.  The lights are on an automatic timer, but if you would like to have them on or off outside of this pre-scheduled time, simply press the 'LIGHTS' button.
5.  When you are finished using the spa, press the 'SPA' button again to turn off the heater and to return the pool equipment back to filtering the pool.                   The spa runs on a 2-hour timer and will turn itself off after 2 hours. This is to protect the system and allow the pool to continue to be filtered properly.

The jets are able to function even if you do not wish to have the spa heated. To use the jets without the heat, simply press the 'JETS' button.

You can also control the poolside fountain and water feature with the 'Water Feat' button.